Why Electric Fireplace Wall Hanging Doesn't Matter To Anyone
Electric Fireplace Wall Hanging Ideas
In contrast to traditional wood or gas fireplaces Wall-mount electric fireplaces are ready to hang right out of the box. These fireplaces can be an excellent way to add ambiance to your home without the need for remodeling or venting.
They are usually heavy and require careful installation. Follow these steps to set up your new electric fire correctly.
1. Connect the Brackets
A wall-mounted or recessed fireplace instantly improves the look of any room. It's a perfect solution for homes without an existing fireplace opening or for apartment residents.
First, decide where you'll install your new electric fire. It's crucial to select an area that isn't susceptible to moisture and is at a minimum of just a few inches from furniture, drapes and areas that are prone to traffic. Once you've located the perfect spot to mark the wall, you can use lines for the top and bottom plates of the fireplace frame.
Use a tool, such as an electric drill to drill exploratory holes into the wall, examining for studs using a stud detector and marking the drywall for the location of the fireplace mounting brackets. Next, patch and paint the drywall, or create a wall to prepare it for fireplace installation.
Depending on the fireplace mounted to the wall you choose, you may have to put the firebox and screen in one piece or separate them by using a wall bracket. If you're not sure about your ability to handle this task on your own, consider hiring an experienced general contractor or carpenter.
You will find a template included with most electric fireplaces. However, you should also keep a spirit level handy and pencil to mark the exact spot where the wall brackets will be placed. Before drilling, use the template to check that the fireplace's power cable can reach from the installation site to an outlet nearby for a convenient plug in.
Install the drywall as smooth and as flush as possible to give the fireplace a sleek appearance. Install trim along the bottom edge and paint, sand and then finish the frame.
Most wall-mounted electric fireplaces come with hooks or slots on the back of the unit that you insert into slots or hooks on the mounting brackets. Make sure that the slots or hooks are properly aligned prior to you connect the fire to wall brackets. Once the fire is in position you can then add additional elements, such as crystal embers, driftwood log pieces, or decorative rocks.
2. Check the Bottom Bracket
The space above a fireplace, mantel or chimney breast is prime real estate for hanging artwork. There is a delicate balance between an artistic arrangement and one that detracts the overall style of the fireplace.
A general rule is that a photo should be 80% of the width of the fireplace or mantel it's placed on. This will help it to remain proportionate & look aesthetically pleasing on the wall. Other decorative ornaments and accessories placed on the mantel can also influence this size & proportional guideline.
If you intend to hang a photo over your electric fire the frame must be made of glass or a material that can withstand high temperatures. If you're not sure, a quick test with a cloth that is heat-sensitive will reveal whether the frame is suitable for this type of installation.
A common concern with displaying pictures above an open flame is the risk of damage to artwork from smoke or other heat sources. This is not a problem with gas or wood-powered fireplace. However when you are planning to install an electric wall-mounted fire it is important to read the instructions of the manufacturer.
Most electrical fires have an attached bracket that can be attached to the wall with either hanging screws or a wall-mounted fixing system. It is recommended to make an exploratory hole in a discrete area of the wall prior to putting up your electric fire. Afterwards you can use a cable finder and pipe to check that there aren't any pipes or cables within the vicinity of the position you've chosen for mounting.
If so, you can either mount your fire over the electrical socket or move it to a new location. If you decide to move it, be sure that the power cable will reach the electrical socket. This is important for older homes or homes with walls that are solid. Otherwise the electric fire will not be able to function properly. Some models include templates that show you the locations to drill holes, while others require you to use a pencil and a spirit level to mark the locations on your wall.
3. Connect the Power Cord
If you've installed a recessed electrical fireplace, you might need to move the plug socket away from the wall to behind the unit. This can give it a cleaner look. Be sure to test the fireplace before you do this to ensure that everything is working exactly as it should.
The third option to install an electrical fireplace is by framing the space and building it into the wall. This gives you a traditional, finished look and allows for a mantel. The owner's manual for your particular model will include information on framing, securing your fireplace, and wiring.
Mark the location of your electric fireplace on the wall using a marker or pencil. Use a carpenter’s level to make sure that the installation area is flat and level. You can also employ a stud locater to mark the location of studs, so that you know that you're drilling into a safe area.
Once you've marked the installation location then use your electric drill to create holes for the hanging screws or bracket screws. Make sure to follow the exact instructions in the owner's manual for this step, especially when you're installing the fireplace in wall. If you're unsure of how to proceed then you can ask an expert for assistance.
A cable organizer kit can be used to hide power cords. These kits typically include clips, sleeves or boxes that can be used to bundle cables. You can make use of fish tape or wire snakes to guide the cords. If you don't want to cut into the drywall, a powerbridge kit will provide a cleaner and safer connection.
Additionally, you can disguise the cords with paintable wire covers or by tacking them to the wall or skirting board. Be sure to keep the cover or tacks away from the source of heat, however. This will protect the cord from being damaged and will also prevent accidental contact.
4. Connect have a peek at this website -mounted electric fireplace is an excellent option for a home renovation or for those who don't have the space or funds to build a gas fireplace. They are easy to hang and are ready to use straight out of the box. They are an excellent choice for those looking for a chic modern accent or the warmth that a fire provides. They can be hung on any wall, just like art, and they are electric with fan-powered heating.
Before you begin the actual installation process it is an excellent idea to take stock of all the equipment and tools you'll need. There are detailed instructions on how to install an electric fire in the user manual. Some models might require you to screw the brackets directly onto the wall, while others may include an adjustable mounting plate that can slide into slots or hooks that attach to the brackets used for mounting. If you are installing a recessed fireplace it is important to ensure that all combustible materials are taken from around the installation area. In general it is recommended to keep these materials at least 3 feet from the front of the fireplace.
After you've checked all the components, you need to connect your electric fireplace and ensure that it works correctly. This is a crucial step, as it will ensure that the flame effect screen and heater work in the way you intended. This will also give you an idea of how the product will look in its final configuration.
Once you're satisfied that your electric fire is working properly, you must think about covering the power cord. This will help keep the final product neat. This can be achieved by installing a new outlet using an outlet cord that can be tucked behind the unit. This will give an elegant finish to your fireplace.